Choosing an electric, mixer or power shower mostly depends on your hot water system. Fitting a new shower in place of an old one typically costs £540 including VAT, and most jobs fall between £300 and £1,000. Your boiler and your water pressure decide what you can fit and how well it works.
How an electric, mixer or power shower works
An electric shower heats cold mains water as it passes through, using its own element. It needs no hot water supply, so it works the same with a combi, a tank or no boiler at all. It needs its own circuit from the consumer unit, and it stops in a power cut.
A mixer shower blends hot and cold water from the system that heats the rest of the house. A thermostatic mixer holds the temperature steady, so it does not run cold when someone flushes downstairs. It therefore suits a combi boiler or a system with good pressure.
A power shower is a mixer with a pump built in. It boosts the flow on a weak gravity-fed system, where a tank in the loft supplies the hot water. It needs an electric supply, and it is not meant for a combi, which already delivers water at mains pressure.
Electric, mixer or power shower: which suits your home
- Combi boiler: an electric shower or a mixer. A mixer gives the best flow if the mains pressure is good.
- Tank in the loft, weak pressure upstairs: a power shower, or a mixer with a pump fitted to it.
- Unvented cylinder: a mixer, which works at mains pressure.
- Bathroom far from the boiler: an electric shower, because it needs no long run of hot pipe.
Have your plumber check the pressure and flow before you buy. A shower that suits one system trickles on another, so buying one the supply cannot drive is a common mistake.
What fitting costs
The guide price covers a shower replacing an old one in the same position, with a basic enclosure. An electric shower needs a registered electrician for the new circuit. A new circuit is notifiable work under the Building Regulations, and a competent person scheme is the usual route. A mixer needs a plumber, so it costs more if the pipes have to move.
Anything beyond a like-for-like swap costs more: moving the shower, for example, or adding a tray. For scale, a whole bathroom fitting typically costs £7,000. Our shower installation guide has the checklist to take to a fitter.
Running costs
An electric shower uses electricity for every minute it runs. A mixer uses hot water from your heating instead. For a short shower the difference is small, because how long you stand under it matters more.
Before you order
Get the make and model in writing, then check the supply can deliver what the shower needs. Make sure the electrician or plumber is registered. Our quote checker shows whether a price is in the usual range, and bathroom costs covers the other jobs in this service.