Cost Calculator

EV charger with a new consumer unit cost

An EV charger with a new consumer unit typically costs £1,500 in the UK, with most jobs between £1,100 and £2,200. That includes VAT at 20%. There is no grant for this work, so the figure above is what you would actually pay.

EV charger with a new consumer unit costs in the United Kingdom: typically £1,500.EV CHARGERSEV charger with a new consumer unit costUnited KingdomTYPICAL COST£1,500from £1,100 · including VAT

What you would actually pay

Typical 7kW smart charger with a consumer unit upgrade and a longer cable run · UK
Typical installed cost EV charger with a new consumer unit, supplied and fitted
£1,250
VAT at 20% Standard rate
£250
Net cost to you
£1,500
Over
months

If you borrowed £1,500.00 over 36 months at 0.0%, it would cost £41.67 a month – £1,500.00 in total, of which £0.00 is interest. The last payment would be £41.55.

Illustration only – not a quote, not an offer of credit, and not financial advice. Rates depend on your circumstances and creditworthiness.

Work out a different amount or rate

EV charger with a new consumer unit cost: where the money goes

ElementTypical range
The charger A 7kW smart unit, tethered or untethered.£420 – £720
New consumer unit A modern board with the protective devices a charger circuit needs, replacing an old one that cannot take the load.£300 – £840
Installation labour Most of a day: swapping the board, running the charger circuit, connecting the charger and testing everything.£360 – £720
Longer cable run Extra cable, clips or trunking where the charger is far from the board, and digging if it goes across a drive.£120 – £540
Earthing and sign-off Any earthing the supply needs, and the certificate and notification once the work is done.£60 – £240

Guide prices including VAT. Your actual cost depends on your property, access and specification.

Advertisement

What should be in a quote

If a quote is missing any of these, ask why before you compare it with another.

  • Why a new consumer unit is needed, and what is wrong with the old one
  • The make of the new consumer unit and the protection it carries
  • The charger make and model, and whether it is tethered or untethered
  • The route of the cable and how it is protected, and the length included
  • How the charger is earthed, and whether an earth rod is needed
  • That the installer is registered with a competent person scheme, and will certify both jobs
  • The VAT rate, shown on the quote

What moves the cost of EV charger with a new consumer unit

The consumer unit

A modern unit with room for the extra protective device is the cheap case. An older one, with no spare ways or with rewireable fuses, has to be replaced, and the work around it is a large share of the bill.

The state of the wiring

A new board is only as good as the circuits attached to it. An electrician who finds poor wiring in the house will need to report it, and may have to fix it before connecting anything new.

Cable route

A charger on the far side of the house, in a garage across a drive or on a detached outbuilding needs a long run, often buried or in armoured cable.

The supply

The incoming supply and the earthing arrangements decide what protection the charger needs, and can add equipment such as an earth rod.

What home electricity costs

Between September 2021 and September 2026, electricity rose 47%, against 28% for prices in general.

Electricity peaked in January 2023, 82% above where it started, and has come down since.

Charging at home costs what electricity costs, so the price of a unit matters more to someone with an electric car than to most households. The Office for National Statistics records what households pay for it every month.

Change since September 2021, month by month
  • Electricity Up 47%
  • Prices in general Up 28%
Show the figures
Prices ofSince Sep 2021Past year
ElectricityUp 47%Up 3%
Prices in generalUp 28%Up 3%

Source: Office for National Statistics, Consumer prices index 04.5.1, electricity; Consumer prices index, all items. Figures to September 2026, published 21 October 2026. Contains public sector information licensed under the Open Government Licence v3.0.

Common questions

Why do I need a new consumer unit for an EV charger?

Because the charger needs its own circuit with the right protection, and an old board may have no room, no suitable protective devices or be a type that no longer meets the wiring rules. The electrician decides on the day, and should explain why in writing.

Can I fit the charger now and the new consumer unit later?

Not safely if the old board cannot protect the new circuit. An electrician will not connect a charger to a board that cannot take it, so ask for both jobs to be quoted together.

Does a new consumer unit need certifying?

Yes. Replacing one is notifiable work under the Building Regulations, which an electrician registered with a competent person scheme certifies for you, and the home should receive the paperwork.

What VAT do I pay on a charger with a new consumer unit?

The rate that applies today is set out under What you would actually pay, above. Both jobs are charged at the standard rate.

EV charger with a new consumer unit cost by region

Get quotes for your home

A guide price only takes you so far. Local firms can price the work on your own home, and comparing a few quotes is the quickest way to see what is reasonable.

Compare free quotes