Paving cost per square metre typically runs from £90 for a driveway to £140 for a patio, including VAT. Block paving sits between them at £95. Those rates include digging out, the sub-base and laying, so they are not the price of the slabs or blocks alone.

Paving cost per square metre by job

Per square metreTypical areaTypical job
Driveway£9040 m²£3,600
Patio£14020 m²£2,800
Block paving£9540 m²£3,800

Typical rates including VAT at 20%, supplied and laid. The range on most jobs is wide, from £40 to £160 a square metre for a driveway.

Why paving cost per square metre varies so much

The surface is the biggest reason. A gravel driveway costs far less than a tarmac one, and clay blocks cost more than concrete ones. The sub-base underneath costs the same whichever surface goes on top, so the cheap surfaces save less than they appear to.

The area matters too, because the rate falls as the job gets bigger. Setting up, the edging and the machine hire cost much the same on a small patio as on a large drive. A small area therefore costs more per square metre than the table suggests, so ask for the price of your own area.

Advertisement

How to work out your own paving cost

  1. Measure the area in square metres, and add a little for cutting.
  2. Multiply by the rate for the surface you want.
  3. Add the extras the rate does not cover, such as drainage, a dropped kerb or removing old paving.

Treat the answer as a starting point. A site visit is the only way to price access, ground conditions and levels, so those can move the figure more than the surface does. Check the planning rules for a front-garden drive too, using the Planning Portal’s paving guide.

What to ask the paver

  • What depth of sub-base is included, and what is it made of?
  • Is digging out and taking away the spoil in the price?
  • How will the surface drain, and is that included?
  • What edging and haunching is allowed for?

Our quote checker shows whether a price is in the usual range. Read paving costs for each job in turn, and the VAT page for the rate on your quote.