Cost Calculator

Outside tap installation cost

An outside tap installation typically costs £120 in the UK, with most jobs between £80 and £300. That includes VAT at 20%. There is no grant for this work, so the figure above is what you would actually pay.

Outside tap installation costs in the United Kingdom: typically £120.PLUMBINGOutside tap installation costUnited KingdomTYPICAL COST£120from £80 · including VAT

What you would actually pay

Typical a cold outside tap fitted off an existing pipe, with an isolation valve · UK
Typical installed cost Outside tap installation, supplied and fitted
£100
VAT at 20% Standard rate
£20
Net cost to you
£120
Over
months

If you borrowed £120.00 over 36 months at 0.0%, it would cost £3.33 a month – £120.00 in total, of which £0.00 is interest. The last payment would be £3.45.

Illustration only – not a quote, not an offer of credit, and not financial advice. Rates depend on your circumstances and creditworthiness.

Work out a different amount or rate

Outside tap installation cost: where the money goes

ElementTypical range
The tap and valve A hose-union bib tap with a double check valve, and an isolation valve inside the house so it can be shut off for winter.£20 – £70
Fitting Drilling the wall, running a short length of pipe from the supply and connecting and sealing the tap.£50 – £160
Longer pipe run A longer run from the supply, through a garage or along an outside wall. Charged by the length of the pipe and the access.£10 – £70

Guide prices including VAT. Your actual cost depends on your property, access and specification.

Advertisement

What should be in a quote

If a quote is missing any of these, ask why before you compare it with another.

  • Whether the price covers the tap, a double check valve and an isolation valve
  • Where the supply will come from, and how the pipe will reach the tap
  • How the wall will be sealed and the pipe insulated against frost
  • Whether hot water is wanted, which costs more
  • That the tap is fitted to the water regulations, and the fitter will test it
  • The VAT rate, shown on the quote

What moves the cost of outside tap installation

Distance from the supply

A tap through the wall behind the kitchen sink is the cheap case. A long run to the side of the house, however, adds pipe and time.

The wall

Drilling through brick is quick, and through stone or thick cavity walls takes longer. If the building is listed, the council may restrict what you can drill.

Frost protection

An outside tap must have an isolation valve and a drain-off point so it does not freeze and split in winter. A cheap job may leave them out, so check the quote.

Hot water

A hot outside tap, for washing a car or pets, needs a second pipe and costs more. It also needs a proper backflow check.

Why plumbing quotes have risen

Between September 2021 and September 2026, plastic building products rose 31% and home repair work 6%, against 28% for prices in general.

Waste pipe, overflow pipe and much of the fittings a plumber carries are plastic, and British manufacturers set the price of plastic building products before the merchant adds a margin. A plumber's time is the other half of the bill, and it has moved on its own course.

Change since September 2021, month by month
  • Plastic building products Up 31%
  • Home repair work Up 6%
  • Prices in general Up 28%
Show the figures
Prices ofSince Sep 2021Past year
Plastic building productsUp 31%Up 5%
Home repair workUp 6%Up 1%
Prices in generalUp 28%Up 3%

Source: Office for National Statistics, Producer price index C2223, builders' ware of plastic; Consumer prices index 04.3.2, services for maintenance and repair of the dwelling; Consumer prices index, all items. Figures to September 2026, published 21 October 2026. Producer and import prices are what manufacturers charge and importers pay, before the merchant's and installer's margins. Contains public sector information licensed under the Open Government Licence v3.0.

Common questions

Do I need a double check valve?

Yes. The water regulations require one on any tap that could connect to a hose, to stop dirty water being drawn back into the mains. A good plumber fits it as standard.

Do I need to turn the tap off in winter?

Yes. Close the isolation valve inside the house and open the outside tap to drain what is left. A tap that freezes can split the pipe behind the wall, and you will find out when it thaws.

Can I fit an outside tap myself?

It is a manageable DIY job with a kit, but you need to drill the wall, connect to the supply and fit the valve correctly. Getting the valve wrong breaks the regulations, so many people pay for it.

Will a metered water bill go up?

If your supply is metered, you pay for the water you use, so a hose left running will show on the bill. If it is not metered, the tap makes no difference to what you pay.

Outside tap installation cost by region

Get quotes for your home

A guide price only takes you so far. Local firms can price the work on your own home, and comparing a few quotes is the quickest way to see what is reasonable.

Compare free quotes