Bricks and blocks calculator
Use this free bricks and blocks calculator to work out what to order from your own measurements. Enter the size of the wall and what it is built from to see how many bricks or blocks to order, with the sand and cement to lay them.
m
m
m²
%
374 bricks, including 5% extra
- Wall area
- 6 m²
- Mortar
- 0.12 m³
- Cement
- 2 bags of 25 kg
- Sand
- 197 kg, or 8 bags of 25 kg
How the bricks and blocks calculator works it out
- A standard brick is 215 × 65 mm on its face and a block 440 × 215 mm; each takes up its size plus a 10 mm joint. That sets how many fit in a square metre.
- Multiply by the wall area, less openings, and add the extra for cuts and breakages. A double-skin wall takes twice the bricks.
- The mortar is the volume of the wall less the volume of the bricks or blocks in it. Dry sand and cement take up about 1.33 times the volume of the wet mix. Split that by the ratio, then weigh it: cement at about 1,440 kg a cubic metre, in 25 kg bags, and sand at about 1.6 tonnes a cubic metre.
What we assume
| Standard UK brick, length | 215 mm | Travis Perkins, brick calculator |
|---|---|---|
| Standard UK brick, height | 65 mm | Travis Perkins, brick calculator |
| Standard UK brick, width | 102.5 mm | Travis Perkins, brick calculator |
| Standard concrete block, length | 440 mm | MP Moran, concrete block |
| Standard concrete block, height | 215 mm | MP Moran, concrete block |
| Concrete block, thickness | 100 mm | DIY.ie, dense concrete block 440 × 100 × 215 mm |
| Mortar joint | 10 mm | Travis Perkins, brick calculator |
| Dry materials needed per cubic metre of finished mortar, screed or renderThe equivalent allowance for sand and cement mixes. | 1.33 | Infralens, material quantities per unit of work |
| Bulk density of cement | 1,440 kg/m³ | Bricknbolt, how many bags of cement in a cubic metre |
| Cement bagThe standard bag at UK builders' merchants. | 25 kg | Travis Perkins, cement and aggregates |
| Building or sharp sand, looseBuilding sand is a little lighter and sharp sand a little heavier; this is the middle of the published range. | 1.6 t/m³ | Total Calc Hub, UK aggregate calculator |
Published figures vary between suppliers and products. Where the bag, tin or roll you are buying states its own coverage or weight, use that.
Advertisement
Bricks and blocks calculator questions
- Does a garden wall need foundations?
- Yes. Even a low wall needs a concrete footing below the frost line, wider than the wall itself. Taller walls, and any wall retaining soil, need proper design.
- Which mortar mix should I use?
- A general-purpose mix suits most garden and house walls. Exposed walls, copings and anything below ground want a stronger mix; soft old bricks want a weaker one, often lime.