Repointing mortar calculator
Use this free repointing mortar calculator to work out what to order from your own measurements. Enter the area of brickwork and how deep the old mortar is being raked out to see how much sand and cement it takes to repoint.
m²
mm
Usually at least twice the joint width.
%
Repointing drops more than you expect.
0.03 m³ of mortar, including 15% extra
- Length of joint
- 172 m
- Cement
- 1 bag of 25 kg
- Sand
- 53 kg, or 3 bags of 25 kg
Older brickwork laid in lime mortar should be repointed in lime, not cement; it needs to breathe.
How the repointing mortar calculator works it out
- In standard brickwork with 10 mm joints, every square metre holds about 17 m of joint, counting the beds and the upright joints.
- Multiply by the area, the joint width and the depth raked out for the volume of mortar, and add the extra for waste.
- Dry sand and cement take up about 1.33 times the volume of the wet mix. Split that by the ratio, then weigh it: cement at about 1,440 kg a cubic metre, in 25 kg bags, and sand at about 1.6 tonnes a cubic metre.
What we assume
| Standard UK brick, length | 215 mm | Travis Perkins, brick calculator |
|---|---|---|
| Standard UK brick, height | 65 mm | Travis Perkins, brick calculator |
| Mortar joint | 10 mm | Travis Perkins, brick calculator |
| Dry materials needed per cubic metre of finished mortar, screed or renderThe equivalent allowance for sand and cement mixes. | 1.33 | Infralens, material quantities per unit of work |
| Bulk density of cement | 1,440 kg/m³ | Bricknbolt, how many bags of cement in a cubic metre |
| Cement bagThe standard bag at UK builders' merchants. | 25 kg | Travis Perkins, cement and aggregates |
| Building or sharp sand, looseBuilding sand is a little lighter and sharp sand a little heavier; this is the middle of the published range. | 1.6 t/m³ | Total Calc Hub, UK aggregate calculator |
| Small bag of sandBulk bags of about a tonne are usually better value for anything larger. | 25 kg | Travis Perkins, cement and aggregates |
Published figures vary between suppliers and products. Where the bag, tin or roll you are buying states its own coverage or weight, use that.
Advertisement
Repointing mortar calculator questions
- Should I repoint in cement or lime?
- Match what the wall was built in. Houses from before the First World War were mostly laid in lime, and hard cement pointing traps damp in soft bricks and makes them spall. Modern brickwork is fine in cement.
- How deep should joints be raked out?
- At least twice the width of the joint, and back to sound mortar. Pointing over a shallow rake falls out again within a few winters.
What the job costs
- Chimney repair costA chimney repair typically costs £900 including VAT.
Other calculators
Get quotes for your home
A guide price only takes you so far. Local firms can price the work on your own home, and comparing a few quotes is the quickest way to see what is reasonable.
Compare free quotes