Cost Calculator

Decking calculator

Use this free decking calculator to work out what to order from your own measurements. Enter the size of the deck and the boards you plan to buy to see how many boards, how many metres of joist and how many screws to order.

m
m
%

24 decking boards, 4.8 m long, including 10% extra

Deck area
12 m²
Joists
11 joists, each 3 m long
Screws
462

How the decking calculator works it out

  1. Work out how many rows of boards fit across the width, allowing a 5 mm gap between boards.
  2. Each row needs enough boards to run the full length, rounded up to whole boards, plus the extra for offcuts.
  3. Joists run across the boards at 400 mm centres, with one at each end, and each board takes two screws at every joist.

What we assume

Gap between decking boards5 mmHowarth Timber, decking joists
Joist spacing for decking boardsThe safe spacing for ordinary timber and composite boards. Some thicker boards allow wider spacing; check the board maker's data sheet.400 mmHowarth Timber, decking joists

Published figures vary between suppliers and products. Where the bag, tin or roll you are buying states its own coverage or weight, use that.

Advertisement

Decking calculator questions

Which way should decking boards run?
Usually along the longest side, or away from the house towards the garden, which makes the deck look longer. Boards must run across the joists, never along them.
How far apart should decking joists be?
For ordinary softwood and composite boards, at the spacing above. Thicker hardwood boards can span further, and boards laid diagonally need closer joists. The board maker states what their boards need.

Other calculators