Fencing calculator
Use this free fencing calculator to work out what to order from your own measurements. Enter the length of the fence to see how many standard panels and posts it takes, and how much post concrete to set the posts in.
m
8 fence panels, 1.83 m wide
- Posts
- 9
- Gravel boards
- 8
- Post concrete
- 27 bags (3 a post)
The last panel may need cutting down to fit; measure the run before ordering.
How the fencing calculator works it out
- Each panel is 1.83 m wide and sits between two posts, so a run of panels needs one more post than panels.
- Divide the length by a panel and a post together, and round up.
- Each post goes in a hole about 300 mm square and 600 mm deep. Fill what the post leaves with post concrete, at about 0.018 m³ a bag.
What we assume
| Standard fence panel width | 1.83 m | Jacksons Fencing, fence panel heights and widths |
|---|---|---|
| Fence post hole, width | 300 mm | Travis Perkins, ready-to-use postcrete |
| Fence post hole, depthAbout a quarter of the post length for a standard fence. | 600 mm | Travis Perkins, ready-to-use postcrete |
| Post-fix concrete per 20 kg bag | 0.018 m³ | Travis Perkins, ready-to-use postcrete |
Published figures vary between suppliers and products. Where the bag, tin or roll you are buying states its own coverage or weight, use that.
Advertisement
Fencing calculator questions
- Should I use concrete or timber posts?
- Concrete posts last far longer and do not rot, and panels slide into their grooves. Timber posts are cheaper, lighter and easier to cut, and suit a fence where the panels are fixed to the face.
- Do I need gravel boards?
- They keep the bottom of the panels off the soil, which is where timber fences rot first. They are worth fitting on any new fence.